Self-Adhesive Vinyl Flooring Planks | Washed Grey Wood Effect | 5m² 36pc

Transform Your Floor in Hours — Not Days

Achieve the coveted Scandi-inspired washed grey wood look with our self-adhesive vinyl flooring planks — one of the most sought-after floor finishes in contemporary UK interior design. The distinctive washed grey tone mimics the silvery, bleached appearance of sun-weathered driftwood, creating an airy, light-enhancing effect that makes rooms feel instantly larger and more relaxed. Each pack of 36 planks covers 5m², with individual planks measuring 15.2cm × 91.4cm at 1.8mm thickness — substantial enough to feel premium underfoot while remaining slim enough to install flush against adjacent floor coverings. The waterproof PVC construction ensures complete resistance to water, moisture and humidity, making these planks equally at home in bathrooms, utility rooms and kitchens as they are in living rooms and bedrooms. The self-adhesive backing eliminates the need for separate adhesive products, dramatically simplifying the installation process.

✅ Key Features

• VINYL FLOORING DIMENSIONS: 91.5cm x 15.2cm each | Quantity: 36 Tiles | Coverage: 5m²
• EASY INSTALLATION: Self-adhesive backing allows for simple peel-and-stick application directly onto clean, smooth, flat surfaces - no additional adhesives required
• REALISTIC DESIGN: Premium wood effect vinyl planks provide an authentic timber appearance whilst offering superior durability and maintenance benefits
• VERSATILE APPLICATION: This self adhesive vinyl floor tiles are suitable for residential and light commercial spaces including living rooms, bedrooms, kitchens, hallways, bathrooms and offices
• LOW MAINTENANCE: Multi-layer vinyl composition ensures the laminate floorings long-lasting wear resistance. Waterproof surface requires only routine sweeping and occasional damp mopping to maintain its pristine appearance
• ✅ Free UK Delivery — order today, transform your floor this week

📐 Technical Specifications

🔧 Step-by-Step Installation

1. Prepare the subfloor: The surface must be clean, dry, flat and free from dust, grease, loose material and old adhesive. Fill any cracks with floor-levelling compound. Sand down any raised edges. A perfectly flat subfloor is essential for good adhesion.

2. Acclimatise the planks: Leave the unopened packs in the room for at least 24 hours before installation. This allows the vinyl to adjust to the ambient temperature and humidity, preventing expansion or contraction after fitting.

3. Plan your layout: Lay planks dry to plan the pattern. Stagger joints by at least 15cm between rows. Start from the most visible wall or the centre of the room. Ensure cut pieces at opposite edges are roughly equal width.

4. Peel and press: Remove the protective backing one plank at a time. Position carefully — the adhesive bonds immediately. Press firmly from the centre outwards using your hand or a rubber roller to eliminate air bubbles.

5. Cut to fit: Mark cutting lines with a pencil and straight edge. Score firmly with a sharp craft knife — multiple shallow passes are safer than one deep cut. Snap along the scored line for a clean break.

6. Finish edges: Use appropriate floor threshold strips at doorways and transitions. Apply silicone sealant where the flooring meets walls in wet areas like bathrooms and kitchens.

7. Allow adhesive to cure: Avoid heavy foot traffic and furniture for 24 hours after installation to allow the factory adhesive to fully bond with the subfloor.

🏠 Room Suitability Guide

Washed grey vinyl planks are particularly effective in rooms where a bright, airy atmosphere is desired. The light-reflective grey tone amplifies natural light, making smaller rooms feel more spacious. Ideal for open-plan spaces, bedrooms, living rooms, kitchens and bathrooms.

📏 Coverage Calculator

Each 36-plank pack covers 5.02m². Measure your room, add 10% for waste, divide by 5.02 for the number of packs needed. Multiple colour options available — select your preferred design above.

❓ Frequently Asked Questions