Drainage Workplace Mat | Anti-Slip Rubber Matting | 10mm | 1m Wide

The Drainage Workplace Mat is purpose-engineered for industrial, construction and commercial environments where water, fluids and debris are an everyday reality. Manufactured from a blend of natural and recycled rubber, this 10mm thick matting combines a precision-moulded hexagonal stud surface with an open-hole drainage matrix — delivering maximum anti-slip grip while continuously channelling water, liquids and particulate matter away from the walking surface. The result is a consistently clear, safe working area in both wet and dry conditions, across the full 1m width of every roll.

Available in 1m × 5m and 1m × 10m rolls, this matting provides flexible, scalable coverage across workstations, production lines, roof walkways, commercial kitchens and any high-footfall area where water management and underfoot safety are non-negotiable.

Why This Mat Outperforms Standard Safety Matting

• Active drainage: Open-hole construction channels water and liquids away from the walking surface rather than trapping moisture beneath — critical in wet industrial environments.
• High-grip surface: The hexagonal stud pattern creates consistent grip across the full mat surface, maintaining traction even under standing water or fluid contamination.
• Hard-wearing rubber compound: Natural and recycled rubber resists compression, cracking and surface degradation under constant heavy footfall and industrial traffic.
• 10mm working depth: Sufficient underfoot cushioning to reduce fatigue on long shifts while maintaining the dimensional stability required for safe footing in dynamic working environments.
• Scalable roll coverage: 5m and 10m lengths allow precise coverage of workstations, walkways and production areas without joins or additional fixings.
• Universal indoor/outdoor rating: Performs across covered loading bays, open construction sites, commercial kitchens and rooftop access routes.

Typical Applications

• Factory and production line workstations
• Engineering workshops and vehicle servicing bays
• Commercial kitchen and food preparation areas
• Construction sites and temporary site walkways
• Roof walkways and plant room access routes
• Warehouse loading and unloading zones
• Wet processing areas and wash-down bays
• Agricultural buildings and livestock handling areas
• Leisure and sports facility corridors
• Car wash forecourts and vehicle workshop bays

Frequently Asked Questions

Can this mat be cut to a custom length?
Yes — the mat cuts cleanly with a sharp utility knife. Mark your cut line with chalk and use a straight edge for a precise finish. This makes it straightforward to fit around obstacles or achieve an exact coverage area.

Is this mat suitable for outdoor use?
Absolutely. This drainage mat is rated for both indoor and outdoor environments. The rubber compound performs across a wide range of UK weather conditions, maintaining grip and structural integrity in rain, frost and UV exposure.

How is the mat held in place?
The mat sits securely under its own substantial weight — 40kg for the 5m roll. In high-traffic environments, floor grip tape can be applied to the perimeter. The drainage apertures also allow the mat to be bolted through to the substrate where a permanent fixing is required.

Is it appropriate for roof walkways?
Yes — this is one of its primary applications. The drainage apertures prevent water pooling on flat roof membranes, and the high-grip hexagonal surface provides reliable footing on wet roofing systems and plant access routes.

What is the minimum order quantity?
Single rolls are available. There is no minimum order quantity for standard stock sizes. Contact us for larger project quantities or custom requirements.