Brick Red EPDM Granules | Wet Pour Rubber Safety Surfacing | 1kg & 25kg

Brick Red EPDM Granules — Premium Wet Pour Safety Surfacing Material

Brick Red EPDM Granules are high-grade ethylene propylene diene monomer rubber granules designed for use as the decorative top layer in wet pour rubber safety surfaces. Vibrant, impact-absorbing, and fully permeable, these granules are the professional choice for playground surfaces, school grounds, parks, and recreational areas across the UK.

Mixed with a polyurethane resin binder and applied as the upper layer over an SBR sub-base, Brick Red EPDM creates a smooth, jointless, and visually striking safety surface that meets critical fall height requirements.

Key Specifications

Why Choose EPDM Granules?

• EN:1177 certified — meets international safety standards for playground impact absorption
• Impact absorbing — cushions falls and reduces injury risk, critical fall height from 1.4m+
• Fully permeable — rainwater drains naturally through the surface, no waterlogging
• UV stable colour — Brick Red tone remains vibrant in direct sunlight without fading
• Wheelchair accessible — smooth finished surface fully supports wheelchair use
• Low maintenance — sweep debris, occasional wash with warm soapy water
• Versatile — suitable for full installations or use in graphic designs and patterns

Applications

• School and nursery playground surfaces
• Public parks and recreational areas
• Holiday parks, resorts, and leisure centres
• Pool surrounds and water play areas
• Sports courts and multi-use games areas
• Decorative graphic inlays and design features

Installation Overview

Prepare sub-base → lay SBR base layer (20–100mm depth depending on fall height) → mix EPDM with binder in forced-action mixer → spread EPDM top layer (min 15mm) → smooth with trowel → allow 24–48 hours cure before light use, 7 days for full cure.

Order a 1kg sample to check colour match before committing to a full 25kg bag.